Dewatering

There are several ways to convert liquids to solids when dewatering sludge but none of them are as effective as our revolutionary, rotary drum technology. These mobile, self-contained units can dewater a wide variety of sludge at a rate of up to 52 m3/hr in even the remotest of locations.  In addition, the energy, water, and polymer required by this unique process are low.

The result is superior to any other dewatering methods currently used with superior effluent quality of less than 100 mg/L and cake solids between 20 and 65 per cent.

We also use geo-textile bags for dewatering. They are made of a permeable fabric. Slurry is forced into dewatering bags at an high rate. The small pores in the geo-textile material separates water from solids in a slower but highly effective process that results in lower energy inputs, reduced costs, and a dewatered product between 15 and 45 per cent solids

 


Blog: Dewatering Best Practices

Depending on what industry you’re in the term “dewatering” can mean different things. Construction site dewatering typically refers to the management of water on a site, whether it be pond water or ground water to allow construction activities to continue uninhibited. The number of dewatering methods are as varied as the number of liquid waste streams they treat.

Wessuc has experience completing projects with each of these best practices and has been working to improve the dewatering process in Canada for over 10 years to achieve efficiency and reduce cost and environmental impact.

> Read more on our blog
 
 

Turning Organic Waste Into Value: The 3-Step Audit